15 Interesting Facts About Subaru Car Keys You've Never Known > Free Board

• List
• Reply
• Write
• Board list options
  • Edit
  • Delete

How to Programming a Subaru Key Fob at Home

Depending on how new your subaru smart key is, you may require having the key fob programmed by an auto locksmith. This is usually done by connecting a programming machine to the computer in the car.

To program your Subaru begin by unlocking the driver's door using the door button control and then shut it. You will hear a chime on the instrument panel, and the dome lights will flash.

Step 1: Find the Transmitter Circuit Board

There are several ways to program your key fob. First, you need to determine the kind of key fob you own. This can be done by examining the shape of the key fob, or by listening for a chime in your car.

Once you have this information, you can start the process of programming your key fob at home. You will need an flathead and a steel key to accomplish this. Open the key fob by twisting. Then push the key made of metal into the case and remove the battery from the tiny tabs that secure it. Replace the battery and put the case back together.

Step 2 2. Unscrew the Key Fob Case

Changing the battery is a good idea because it can bring back key fobs which aren't working for a while. In some cases the buttons on the key fob may be broken. If you are able to see that the button's contacts made of metal have been damaged, you can try soldering them back in place to make them work again.

Make sure you turn off your ignition and close your doors prior to you begin. You can do this by closing the driver's side door and pressing your door button ten times in quick sequence. You should then hear the instrument panel chime and the dome lights will light up. This indicates that you're ready to proceed.

Step 3: Insert the Key Fob in the Ignition

Many websites will explain how to replace subaru remote key key fob (click over here) to program your brand new or replacement Subaru keyfob at home. But, the majority of them do not give very specific instructions. A professional locksmith or auto dealer in Fort Bliss is the best alternative for reprogramming a digital car key.

Sit in the driver’s seat with the doors shut and the engine turned off. Use the door button control and use it to unlock all doors. Close and open the driver's door three times. Insert and remove the ignition key (don't turn it) 10 times in 40 seconds. The system should chirp to confirm that the settings have been modified.

Step 4: Turn the ignition On

It is crucial to understand that this method of programming a key fob only works if you already have a functioning key. If you don't you can find an auto-locksmith or dealer who will be required to program a key for your Subaru Fort Bliss.

Once your key has been programmed you should be able start your car within five seconds. Begin by closing all doors, then turning off the engine. Then, sit in your driver's chair and unlock all doors with the door button control. Put the key into the ignition and then turn it to the first position. The electrical systems will be activated, however, the engine remains off. Repeat this process 10 times.

Step 5 Step 5: Unlock Driver's Door

Subaru offers a variety of high-end vehicles with key fobs that lock and unlock doors, turn on the engine, and even defrost windows. However, there are times when these devices stop working properly.

Find a locksmith or dealer to solve the issue. This will solve the issue and ensure that your vehicle is safe.

To do this, open the door to the driver's side and close it. Then, insert the ignition key in and turn it to the first position. Then, reverse it to the off position. Repeat this ten times in a row as quickly as possible. After the tenth rep, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock buttons on the driver's Door

If you're looking to change the battery inside the subaru car key key fob, the procedure is straightforward. First, open the external fob casing. Make use of a flathead to pry the casing open inside and remove the batteries that were in there.

After removing the old battery, replace it with a new one and close the case. Assume a seat in the driver's chair and then unlock all doors by using the door button control. Put the key in the ignition and turn the key so that the electric system is turned on, but the engine is off. Repeat this ten times in a row until you hear the chime from the instrument panel. This will bring the system into programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

The annoying chirp which can be heard when unlocking or locking a subaru outback key fob Key Fob from outside of the vehicle can be distracting for some owners. In certain situations, the chirp can be removed by opening and closing all doors, and then a double-click of the lock button on the key fob.

Close all doors including the fuel-filler lid and turn off the ignition. For 10 seconds pressing and holding the lock button on the key fob. When this is done the instrument panel emits an audible chime. The chirp signals that the lid of the fuel-filler door are locked. It is possible to change the setting to make the doors lock automatically without pressing a switch.

Step 8 Step 8: Enter your 8-digit Transmitter Number

Keep the first 8 digits of the code in your head. Now, get into the driver's seat, shut the doors and turn the key to the first position. After ten turns your instrument panel should begin to sound once.

Next, open the case for the key fob and look for the circuit board for the transmitter inside. There will be two or three sets of numbers (8-digits) on the circuit board. Note the first number sequence, and follow the steps in this guide to register the code on your vehicle's system. This may require visiting the dealer for older models.