Autel IM508 Add Smart Key For 2016 Hyundai Santafe ID46 : Original Launch X431 Tool On OBD2shop.co.uk > Free Board

Go to main content

Site-wide search

Go back Free Board

Autel IM508 Add Smart Key For 2016 Hyundai Santafe ID46 : Original Lau…

Page information

Author ulFUq0 Date 24-11-18 13:33 Views 16 Comments 0

Content

1. Read password

Plug IM508 cable into OBD,

IMMO >> Hyundai >> Select system >> Read PIN code >> Read PIN code (46 smart card) >> Read PIN code by OBD

This function is only supported for vehicles with 46 chip smart card. Please check if the key type is correct.

Press "OK".

Turn on hazard warning lights.

Open and close the driver's door once!

Reading password. Please wait until 100%...

Turn off ignition (Note: the instrument screen is black).

Password to be read: 004938

2. Learn key

Smart key system >> No slot >> Smart type 8(CAN) >> Remote learning

Press start button.

Press "Smart key learning".

This function supports adding keys and losing all keys.

When you run this function, all existing keys will be erased. You need to re-learn all old keys to be able to use them normally.

Press "Yes" to continue.

Turn off the ignition.

(Note: the instrument screen is black).

Open and close the driver's door once!

Please enter the 6-digit security code: 004938

OK >> Yes

Note! Click OK to complete the next step.

Within 5 seconds after pressing OK, use the back or top of the smart key to press and hold the START button for 5 seconds until the anti-theft light flashes. (If the operation fails at the prompt, please remove the key case and re-run the steps above to ensure that the key chip can be successfully programmed.)

Programming successful.

Press "Yes" to program the next program, press "No" to complete.

Number of current keys: 2

Test two keys.

Both worked well and completed perfectly!







1. Read password

Plug IM508 cable into OBD,

IMMO >> Hyundai >> Select system >> Read PIN code >> Read PIN code (46 smart card) >> Read PIN code by OBD

This function is only supported for vehicles with 46 chip smart card. Please check if the key type is correct.

Press "OK".

Turn on hazard warning lights.

Open and close the driver's door once!

Reading password. Please wait until 100%...

Turn off ignition (Note: the instrument screen is black).

Password to be read: 004938

2. Learn key

Smart key system >> No slot >> Smart type 8(CAN) >> Remote learning

Press start button.

Press "Smart key learning".

This function supports adding keys and losing all keys.

When you run this function, all existing keys will be erased. You need to re-learn all old keys to be able to use them normally.

Press "Yes" to continue.

Turn off the ignition.

(Note: the instrument screen is black).

Open and close the driver's door once!

Please enter the 6-digit security code: 004938

OK >> Yes

Note! Click OK to complete the next step.

Within 5 seconds after pressing OK, use the back or top of the smart key to press and hold the START button for 5 seconds until the anti-theft light flashes. (If the operation fails at the prompt, please remove the key case and re-run the steps above to ensure that the key chip can be successfully programmed.)

Programming successful.

Press "Yes" to program the next program, press "No" to complete.

Number of current keys: 2

Test two keys.

Both worked well and completed perfectly!

Comments 0

There are no registered comments.

Copyright © Your domain. All rights reserved.

Site Information

Company Name : Company Name / Representative : Representative Name
Address : 123-45 OO-dong, OO-gu, OO City, OO Province
Business Registration Number : 123-45-67890
Phone : 02-123-4567 Fax : 02-123-4568
Mail-order Business Report Number : OO-gu No.123
Privacy Officer : Privacy Officer Name

View PC Version